Skip to content
FREE USA SHIPPING ON ORDERS OVER $125 USD IN PRODUCTS AFTER DISCOUNTS ARE APPLIED (retail customers only) - We accept INSTALLMENTS WITH SEZZLE AND AFTERPAY
FREE USA SHIPPING ON ORDERS OVER $125 USD IN PRODUCTS AFTER DISCOUNTS ARE APPLIED (retail customers only) - We accept INSTALLMENTS WITH SEZZLE AND AFTERPAY

ProAiir INK Alcohol-Based Airbrush Body Paint 4oz - White

Write a review
| Ask a question
Write a review
| Ask a question
by ShowOffs Body Art | Product Code: SOBAPAI214
Original price $35.00 - Original price $35.00
Original price
$35.00
$35.00 - $35.00
Current price $35.00

4 in stock!

Note: No international shipping or APO/FPO/DPO. Ships only within the USA.
-
+

What are the dimensions of this ProAiir INK body painting product?

This is a 4oz plastic container with screw on cap that is 4” tall and 1 3/8” in diameter at the base. THIS ITEM CAN ONLY BE SHIPPED WITHIN THE USA AND CAN'T BE SHIPPED TO APO/FPO/DPO. In order for your package to be shipped using air mail, the package can not be over 25lbs and it can't have more than 48 Fl Oz of Alcohol Based products. If these conditions are not met, we will contact you to arrange a different shipping method.


What are ProAiir INK Colors best for?


ProAiir INK colors are perfect for creating long lasting, water resistant scary monsters, zombies, aliens, beauty faces, animals and so much more! ProAiir Products are perfect for pool parties, dance parties and all day events in the heat. They are also good for airbrushing temporary tattoos since it can be left on for a few days. Cosplayers, haunters, dance groups, makeup artists, theater groups, and both beginner and professional face and body painters all love the quality of ProAiir INK products. Proaiir INK Proaiir Hybrid White is a bright solid white, perfect for all of your highlighting needs! It works good with a brush for line work too.

How to apply and remove ProAiir Ink airbrush body paint?


Apply ProAiir INK makeup with an airbrush set to 10-15 psi, or apply with a dry face painting sponge or brush. For best results, only apply ProAiir directly to the skin, not on top of makeup, lotions or sunscreen. If you use ProAiir with an airbrush, make sure to use it in a well-ventilated area away from open flames. Spray between 2-4 inches from the surface for best color and control. Less is best! Apply in light coats, layering for richer colors and a deeper effect. A super thick application could lead to chipping. Wipe off over-spray with rubbing alcohol on a cotton swab. If you use ProAiir INK airbrush paint with a sponge or brush, you can choose to attach a spray cap to the bottle to spray your sponges or pour some paint into a plastic or metal palette and load your brush or sponge with it. Only pour a small amount at the time because it will dry our fast due to the alcohol content. Also, make sure to paint right away after loading your sponge or brush so that the paint doesn’t dry out. If you want to blend colors it is best to do it directly on your brush or sponge and apply it like that, as blending on the surface once the paint is applied won’t be easy.
ProAiir INK paints are water resistant and need to be removed with an oil based cleanser and/ or alcohol. Due to the long lasting application of this product, it is NOT recommended for use on the faces of young children. To remove ProAiir INKS from the skin use 91% Isopropyl Alcohol or baby oil. Let either of the them set in to the paint in order to loosen the product. Proceed to gently rub the area with a sponge using some soap and water. If you have been fully painted we recommend oiling up and soaking in a warm tub since warm water helps loosen up the body paint before attempting to remove it. To remove from fabric, do NOT use water. Instead, apply rubbing alcohol or an alcohol-based hair spray and dab to remove.
Airbrush cleaning tips from ProAiir Pros: · Rubbing alcohol 91% + proof is fine but for extensive cleaning - Denatured Alcohol is recommended. Seek out the biodegradable green formula found at Home Depot or Lowes paint dept. (Denatured is also used to clean windows). Spray Denatured or Alcohol through airbrush, perform a front spray and back flush. Withdraw airbrush needle slightly, tighten in place then place airbrush tip down into storage jar containing roughly one inch of Rubbing Alcohol, just enough to submerge the airbrush siphon. After job storing airbrushes in Alcohol (some have tried Windex) will prevent makeup from drying inside the airbrushes long enough till you get home. Once you are home you can clean them much easier.

What else should I know about using ProAiir INKS with an Airbrush?

Stencil cleaning: · When stencils require cleaning to restore appearance, store in zip-locking bag or shallow bowl containing 91% Alcohol for 30-60 minutes. Rinse and dry upon removing. · Because ProAiir is so thin you will find little makeup layers on stencils, some people don't even clean them! · DO NOT over oil your airbrush- oil your airbrushes after 20 uses or when needed. This will cause spattering of ink. Only use airbrush oil. Special notes: ­­­ · Do NOT mix ProAiir™ with water or any other products. ProAiir™ INKS colors CAN be mixed with other ProAiir™ INK colors to create new blended colors. · Fluorescent colors separate a little and require shaking or stirring. · Should separation occur, shake, stir or quickly back flush the airbrush (cover the adapter cap air hole and back flush spray briefly to mix pigments). Look up videos on airbrush back flush - don't try if not familiar with it. · Metallic's generally have shorter staying power than other formulas. · When using white, apply first to skin - sometimes does not cover opaque over red colors. · Do not apply to open wounds or soars. · Shake bottle well, pigment can be richer and harder to remove from skin. · Adding a marble or stainless steel nut can be added to help with mixing liquids in bottles. · We do not recommend glass bottles, plastic is preferred. Glass breaks and attracts heat causing evaporation of product or thickening.

< Manufactured for Show offs Body Art - ProAiir INK Products. Discontinue use if rash develops. Do not apply to broken skin. Avoid contact with fabrics, carpet and upholstery. Remove with mild soap and water. Some traces of color may remain for a short period after washing. Warnings on ProAiir INK label: Use adequate ventilation and keep away from flame. For external use only. Contact a physician if swallowed. Avoid contact with eyes. If contact occurs, flush thoroughly with water. Makeup contained in this package is hypo-allergenic & non-toxic. Storage: Like with all cosmetic products, it is always best to keep PROAIIR face and body paints away from a direct light source and store in a cool and dry environment. Excessive heat can dry up and spoil your face paints and excessive light can fade the colors. Make sure to always keep the lids/caps closed to prevent evaporation and spilling. ProAiir has a 3-5 year shelf life after the bottle has been opened, and 10 years unopened. Made in the U.S.A .
If you would like a copy of ProAiir INKS Material Safety Data Sheet, please click here and here to download the MSDS.
Ingredients: Isopropyl Alcohol, Acrylates Copolymer, Caster Seed Oil, Alcohol SDA 40-B, Ethylcellulose, Zinc Stereate, May Contain FD&C Pigments, Black Iron Oxide, D & C Orange #4, D & C Red #7, D &C Red #22, D& C Red #27, D &C Red #28 Al Lake, D & C Red #33 AI Lake, F D & C #40, D & C Red #6 BA Lake, D& C Yellow #8, FD&C Blue #1 AI Lake, FD&C Yellow #5 AI Lake, Gold Mica - 1372, Titanium Dioxide, Orchid Mica - 1372, Tin Dioxide, Green Mica - 1372, Silver Mica - 1372, Iron Oxide, Soft Pink Mica - 1372, Carmine, Ultra Marine Blue.