Skip to content
FREE USA SHIPPING ON ORDERS OVER $125 USD IN PRODUCTS AFTER DISCOUNTS ARE APPLIED (retail customers only) - We accept INSTALLMENTS WITH SEZZLE AND AFTERPAY
FREE USA SHIPPING ON ORDERS OVER $125 USD IN PRODUCTS AFTER DISCOUNTS ARE APPLIED (retail customers only) - We accept INSTALLMENTS WITH SEZZLE AND AFTERPAY
ProAiir ATOMIC Alcohol Based Hybrid Airbrush Paint - UV Uranium Yellow (4oz) (SFX - Non Cosmetic)

ProAiir ATOMIC Alcohol Based Hybrid Airbrush Paint - UV Uranium Yellow (4oz) (SFX - Non Cosmetic)

by ShowOffs Body Art | Product Code: SOBAPAA117
$38.00
$38.00 - $38.00
$38.00
$38.00
$38.00 - $38.00
$38.00
or 4 payments of $9.50 with
ⓘ

1 in stock!

-
+

What are the dimensions of this ProAiir airbrush paint bottle?

This is a 4oz plastic container with screw on cap that is 5” tall and 2” in diameter at the base.

How to apply and remove this ProAiir airbrush paint?

Apply Proaiir Hybrid airbrush paint with an airbrush gun set to 10-15 psi, or apply with a dry face painting sponge or brush. If you use ProAiir with an airbrush, make sure to use it in a well-ventilated area away from open flames. Spray between 2-4 inches from the surface for best color and control. Less is best! Apply in light coats, layering for richer colors and a deeper effect. A super thick application could lead to chipping. Wipe off over-spray with rubbing alcohol on a cotton swab. If you use ProAiir Hybrid airbrush paint with a sponge or brush, you can choose to attach a spray cap to the bottle to spray your sponges or pour some paint into a plastic or metal palette and load your brush or sponge with it. Only pour a small amount at the time because it will dry our fast due to the alcohol content. Also, make sure to paint right away after loading your sponge or brush so that the paint doesn’t dry out. If you want to blend colors it is best to do it directly on your brush or sponge and apply it like that, as blending on the surface once the paint is applied won’t be easy.

Neon colors are made with pigments that have not been approved by the USA Cosmetic Regulator to be used in cosmetics (the agency has not tested them yet for cosmetic use). According to the manufacturer they have been independently tested and determined safe for cosmetic use by independent labs and by other government agencies in different countries. Following the regulator’s guidelines, they are labeled as a Special FX Product - Prosthetic Paint (for professional use only) - Not a cosmetic Product Apply product to prosthetic appliances, bald caps, clothing, etc. This applies ONLY to the UV/Neon pigments in this product and not to the rest of the pigments, and ONLY in the USA and some parts of Europe.


Proaiir Hybrid paints are water resistant and need to be removed with an oil based cleanser or with liquid hand soap and water. Liquid hand soap or oil cleaner must be used first to break down the paint since this is a very durable product. Keep rubbing the cleaner into the paint until you see it release from the painted surface in small particles. Once it has all broken down, you can rinse it away with water. Repeat if necessary. Using a cloth or sponge loaded with soap or oil will help speed up the process, versus just using your hands. To remove from fabric, do NOT use water. Instead, apply rubbing alcohol or an alcohol-based hair spray and dab to remove.
Airbrush cleaning tips from Proaiir Pros: · Rubbing alcohol 91% + proof is fine but for extensive cleaning - Denatured Alcohol is recommended. Seek out the biodegradable green formula found at Home Depot or Lowes paint department (denatured is also used to clean windows). Spray Denatured or Alcohol through airbrush (front spray and back flush). Withdraw airbrush needle slightly, tighten in place then place airbrush tip down into storage jar containing roughly one inch of Rubbing Alcohol. (just enough to submerge the airbrush siphon). After your job storing your airbrush guns in Alcohol (some have tried Windex) will prevent makeup from drying inside the airbrushes long enough till you get home. Once you are home you can clean them much easier.

What are Proaiir Hybrid Flo best for?

ProAiir colors are perfect for creating long lasting, water resistant scary monsters, zombies, aliens, beauty faces, animals and so much more! Proaiir Products are perfect for pool parties, dance parties and all day events in the heat. Proaiir Hybrid Uranium Yellow is a bright and opaque yellow, great for black light and regular light situations.

What else should I know about using Proaiir Hybrid with an Airbrush?

Stencil cleaning: · When stencils require cleaning to restore appearance, store in zip-locking bag or shallow bowl containing 91% Alcohol for 30-60 minutes. Rinse and dry upon removing. · Because ProAiir is so thin you will find little makeup layers on stencils, some people don't even clean them! · DO NOT over oil your airbrush- oil your airbrushes after 20 uses or when needed. This will cause spattering of ink. Only use airbrush oil. Special notes: ­­­ · Do NOT mix ProAiir™ with water or any other products. ProAiir™ Hybrid colors CAN be mixed with other ProAiir™ Hybrid colors to create new blended colors. · Fluorescent colors separate a little and require shaking or stirring. · Should separation occur, shake, stir or quickly back flush the airbrush (cover the adapter cap air hole and back flush spray briefly to mix pigments). Look up videos on airbrush back flush - don't try if not familiar with it. · Metallic's generally have shorter staying power than other formulas. · When using white, apply first to skin - sometimes does not cover opaque over red colors. · Do not apply to open wounds or soars. · Shake bottle well, pigment can be richer and harder to remove from skin. · Adding a marble or stainless steel nut can be added to help with mixing liquids in bottles. · We do not recommend glass bottles, plastic is preferred. Glass breaks and attracts heat causing evaporation of product or thickening.